Philips DVP3355V User manual - Page 25

English Français B DISPLAY Setting You can change the display functions. Follow steps 1 to 3 in the "CUSTOM Menu" section on page 24. 4 Select the desired item. or DISPLAY menu 5 TV ASPECT: QUICK (Default: 4:3 LETTER BOX) See note on the right. TV ASPECT STILL MODE PROG. SCAN 4:3 LETTER BOX AUTO OFF TV ASPECT 4:3 LETTER BOX 4:3 PAN & SCAN 16:9 WIDE Select the desired setting. or SETUP DISPLAY TV ASPECT STILL MODE PROG. SCAN 4:3 LETTER BOX AUTO OFF Note(s): PROGRESSIVE SCAN: • You can set "PROG. SCAN" to "OFF" in "DISPLAY" menu or press and hold [B (PLAY)] on this Unit on the DVD side for more than 5 seconds during playback until the P-SCAN indicator on this Unit turns off. • When "PROG. SCAN" is "ON", video signals from the Unit's VIDEO OUT and S-VIDEO OUT jacks will be distorted or not be output at all. Note(s): • In "QUICK" menu, "OSD LANGUAGE", "TV ASPECT", "PROG. SCAN" or "DOLBY DIGITAL" are available. "QUICK" menu consists of the setting menu frequently used and they are accompanied with QUICK . You can make all settings in "CUSTOM" menu. STILL MODE: (Default: AUTO) See note on the right. TV ASPECT STILL MODE PROG. SCAN 4:3 LETTER BOX AUTO OFF STILL MODE AUTO FIELD FRAME PROGRESSIVE SCAN: QUICK (Default: OFF) See note on the left. TV ASPECT STILL MODE PROG. SCAN 4:3 LETTER BOX AUTO OFF 4:3 LETTER BOX AUTO ON Select the desired setting. or If there is no picture or you do not press any buttons for 15 seconds, "PROG. SCAN" will switch to "OFF" and it will exit "SETUP" menu. Before proceeding... 1. Make sure your TV has progressive scan. 2. Connect with component video cable NOTE: If there is no picture or picture is distorted after selecting 'YES', wait about 15 seconds for auto recovery. Activate Progressive? NO YES SELECT: K / L SET:OK Confirm again to use progressive scan. If Picture is good, Select 'YES'. NO YES SELECT: K / L SET:OK Select "Yes". or Select "Yes". or 6 To exit "TV ASPECT" or "STILL MODE" menu To complete "PROG. SCAN" setting Note(s): TV ASPECT: • Select "4:3 LETTER BOX", so that black bars may appear on the top and bottom of the TV screen. • Select "4:3 PAN & SCAN" for a full height picture with both sides adjusted. • Select "16:9 WIDE" if a wide-screen TV is connected to this Unit. STILL MODE: • Select "AUTO" usually. • If you select "AUTO", it automatically selects the best resolution setting ("FRAME" or "FIELD") based on the data characteristics of the pictures. (default) • If you select "FIELD", the picture in the still mode will be stabilized. • If you select "FRAME", the picture in the still mode will be highly defined. • An individual picture on the TV screen is called a "frame", which consists of two separate images called "field". • Some pictures may be blurred if you select "AUTO" in the still mode due to their data characteristics. Español C AUDIO Setting Choose the appropriate audio setting for your device. It is only affected during the playback of DVD discs. Follow steps 1 to 3 in the "CUSTOM Menu" section on page 24. 4 Select the desired item. or AUDIO menu SETUP AUDIO DRC DOWN SAMPLING DOLBY DIGITAL ON ON BITSTREAM 5 DRC (Dynamic Range Control): (Default: ON) Set to "ON" to compress the range between soft and loud sounds. DRC ON DOWN SAMPLING ON DOLBY DIGITAL BITSTREAM OFF ON BITSTREAM DOWN SAMPLING: (Default: ON) Set to "ON" when outputting in 48kHz. Set to "OFF" when outputting the original sound. DRC ON DOWN SAMPLING ON DOLBY DIGITAL BITSTREAM ON OFF BITSTREAM Note(s): • In "QUICK" menu, "OSD LANGUAGE", "TV ASPECT", "PROG. SCAN" or "DOLBY DIGITAL" are available. "QUICK" menu consists of the setting menu frequently used and they are accompanied with QUICK . You can make all settings in "CUSTOM" menu. DOLBY DIGITAL: QUICK (Default: BITSTREAM) Set to "BITSTREAM" when the Unit is connected to a Dolby Digital decoder. • BITSTREAM: outputs Dolby Digital signals. • PCM: converts the Dolby Digital into PCM (2 channel). DRC ON ON DOWN SAMPLING ON ON DOLBY DIGITAL BITSTREAM PCM 6 To exit the menu Note(s): DRC: • This function is available only on the discs which are recorded in the Dolby Digital format. DOWN SAMPLING: • When playing back a 96kHz disc with the copyright protection, the sound will be down sampled at 48kHz even if the "DOWN SAMPLING" is set to "OFF". • This function is only available when the disc digital output was recorded at 96kHz. Continued on next page. - 25 - EN