Philips DVP3355V User manual - Page 8

Note to CATV system installer, Notes

Page 8 highlights

English Français Español Symbols Used in This Manual The following symbols appear in some headings in this manual. : Description refers to video cassette tapes. Description refers to DVD-VIDEO. : Description refers to audio CD. Note to CATV system installer: • This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground should be connected to the grounding system of the building, as close to the point of cable entry as practical. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Connecting to RF Modulator (Not Supplied) If your TV has antenna in jack only, it is still possible to connect this Unit to your TV by using an RF modulator. In this case, follow the instructions below. 1) Disconnect the power cords of the Unit from the AC outlet. 2) Make the connection as illustrated below. 3) Set your RF modulator's channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area. If your RF modulator has a modulator/antenna switch, set it according to the manual supplied with the RF modulator. 4) Plug in the power cords of the Unit to the AC outlet. 5) Turn on your TV and choose the same channel as you set the RF modulator's channel 3/4 switch to. For more details, follow the manual supplied with the RF modulator. rear of this Unit DIGITAL AUDIO OUT DVD AUDIO OUT S-VIDEO OUT COMPONENT VIDEO OUT Y DVD/VCR VCR AUDIO OUT AUDIO IN L L L COAXIAL R CB/ PB R R VIDEO OUT VIDEO IN CR/ PR DVD/VCR AUDIO OUT L R VIDEO OUT VHF / UHF antenna RCA audio cable RCA video cable rear of your RF modulator rear of TV ANT. IN RF coaxial cable or ccoabmlepaTnVy RF coaxial cable 3 4 ANT. IN CHANNEL R L AUDIO IN VIDEO IN TO TV Set channel 3 or 4 No Antenna (RF) Output! If your TV only has an Antenna input (no A /V inputs), you will need an ANT. IN RF modulator (NOT INCLUDED) to connect this Unit to your TV. TV RF modulator 3 4 L R CHANNEL VIDEO IN AUDIO IN TO TV ANT. IN Note(s): • RF modulator is not supplied with this Unit. You need to purchase this separately. • The picture quality may suffer if this Unit is connected through an RF modulator to an RF only TV. -8- EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30

Español
Français
English
– 8
EN
Manufactured under license from Dolby
Laboratories. Dolby and the
double-D
symbol are trademarks of Dolby
Laboratories.
Symbols Used in This Manual
The following symbols appear in some headings in this manual.
:
Description refers to video cassette tapes.
Description refers to DVD-VIDEO.
:
Description refers to audio CD.
Note to CATV system installer:
This reminder is provided to call the CATV system installer’s attention
to Article 820-40 of the NEC that provides guidelines for proper
grounding and, in particular, specifies that the cable ground should be
connected to the grounding system of the building, as close to the point
of cable entry as practical.
DIGITAL
AUDIO OUT
COAXIAL
L
L
Y
R
L
R
R
C
/
P
C
/
P
DVD/VCR
AUDIO OUT
VIDEO OUT
L
R
L
R
If your TV only has an Antenna input
(no A/V inputs), you will need an
RF modulator (NOT INCLUDED) to
connect this Unit
to your TV.
RF modulator
AUDIO IN
R
L
VIDEO IN
CHANNEL
4
3
TO TV
TV
ANT. IN
ANT. IN
No Antenna (RF) Output!
rear of TV
rear of your RF
modulator
AUDIO IN
TO TV
ANT. IN
L
R
CHANNEL
4
3
VIDEO IN
ANT. IN
Set channel 3 or 4
rear of this Unit
RF coaxial cable
RF coaxial
cable
VHF / UHF
antenna
cable TV
company
or
RCA video cable
RCA audio cable
If your TV has antenna in jack only
, it is still possible
to connect this Unit to your TV by using an RF modulator.
In this case, follow the instructions below.
1)
Disconnect the power cords of the Unit from the AC
outlet.
2)
Make the connection as illustrated below.
3) Set your RF modulator’s channel 3/4 switch to
either 3 or 4
, whichever the TV channel is least used in
your area. If your RF modulator has a modulator/antenna
switch, set it according to the manual supplied with the RF
modulator.
4)
Plug in the power cords of the Unit to the AC outlet.
5)
Turn on your TV and choose the same channel as
you set the RF modulator’s channel 3/4 switch to.
For more details, follow the manual supplied with the RF
modulator.
Note(s):
• RF modulator is not supplied with this Unit. You need to
purchase this separately.
• The picture quality may suffer if this Unit is connected through
an RF modulator to an RF only TV.
Connecting to RF Modulator
(
Not Supplied
)