Philips FWM70 User manual - Page 20

Disc Operations English Programming the disc tracks Programming tracks is possible when playback is stopped. Up to 99 tracks can be stored in the memory in any order. IMPORTANT! It is only possible to programme from the current selected disc tray. 1 2 4 6 7 35 1 Load the desired discs into the disc trays (refer to "Loading discs"). 2 Press CD or one of the CD 1~3 buttons to select a disc. 3 Press PROGRAM to start programming. ➜ PROG starts flashing. 4 Press - or + (or í/ë on the remote control) repeatedly to select the desired track. ● For MP3 discs, press 4 or ¢ (or 1 / ¡ on the remote control) and - or + (or í/ë on the remote control) to select the desired album and title for programming. 5 Press PROGRAM to store. ● Repeat steps 4-5 to select other tracks. ➜ If you attempt to programme more than 99 tracks,"PROGRAM FULL" is displayed. 6 To start programme play, press ÉÅ. 7 To stop playback or to end the programming, press Ç once. ➜ PROG stays and the programme mode remains active. Checking the programme 1 Stop playback and press - or + (or í/ë on the remote control) repeatedly. 2 Press Ç to exit. OR Press ÉÅto start playback from the current programmed track Clearing the programme ● Stop playback, then press Ç to clear the program. ➜ PROG disappears and "PROGRAM CLEARED" is displayed. Note: - The programme will be erased if the system is disconnected from the power supply or you switch to another source mode. Notes: - If the total playing time has reached 100 minutes or one of the programmed tracks has a number greater than 30, "-:-" is displayed instead of the total playing time. - The system will exit programming mode if no button is pressed within 20 seconds. 20