Philips FWP900 User manual - Page 12

Switching the Dolby Pro Logic

Page 12 highlights

English Dolby Pro Logic ➜ "TEST TONE" followed by "ADAPT BALANCE, CENTER AND REAR LEVEL" will be displayed. ➜ The test signal will last for about 90 seconds. Adjust the sound level DPL TEST TONE BALANCE L R CENTER -+ REAR -+ Front speakers G Press BALANCE L for left speaker and press BALANCE R for right speaker. ➜ "BAL L +XX" or "BAL R +XX" will be displayed. Center speaker G Press CENTER + or -. ➜ "CENT +XX" or "CENT-XX" will be displayed. Surround speakers G Press REAR + or -. ➜ "REAR +XX" or "REAR -XX" will be displayed. To switch off the TEST TONE G Press TEST TONE. Notes: - It is advisable to set the speakers' level at normal listening level. - "XX" denotes the sound level. Switching the Dolby Pro Logic G Press DPL (PRO LOGIC) repeatedly to select and cycle through the various sound modes. ➜ The Dolby Pro Logic display panel will light up with the selection. DPL TEST T PRO LOGIC Dolby Surround ➜ Dolby Center Phantom ➜ Dolby 3 Stereo ➜ Stereo ➜ Dolby Surround ... Dolby Surround This setting is for a full Dolby Surround Pro Logic mode. ➜ "DOLBY SURROUND" will be displayed. LEFT CENTER RIGHT SURR SURR Dolby Center Phantom This setting is for use without the center speaker. LEFT CENTER RIGHT It redistributes the center speaker sound to the left SURR SURR and right speakers, providing conventional stereo across the front. ➜ "DOLBY CENTER PHANTOM" will be displayed. Dolby 3 Stereo Use this setting when full surround is not required, but a wide stereo sound is LEFT CENTER RIGHT desired. It requires only the SURR SURR left, right and center speakers. ➜ "DOLBY 3 STEREO" will be displayed. Normal Stereo This setting is for normal stereo sound without Dolby Pro Logic. It requires only the left and right speakers. ➜ "STEREO" will be displayed. LEFT CENTER RIGHT SURR SURR 12 pg 001-033/P900/37-Eng 12 12/8/00, 1:52 PM 3139 115 20411

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33

12
English
3139 115 20411
"
TEST TONE
" followed by "
ADAPT
BALANCE
,
CENTER AND REAR LEVEL
" will
be displayed.
The test signal will last for about 90 seconds.
Adjust the sound level
BALANCE
CENTER
REAR
DPL
TEST TONE
L
R
+
-
+
-
Front speakers
Press
BALANCE L
for left speaker and press
BALANCE R
for right speaker.
"
BAL L +XX
" or "
BAL R +XX
" will be
displayed.
Center speaker
Press
CENTER
+
or
-
.
"
CENT +XX
" or "
CENT-XX
" will be displayed.
Surround speakers
Press
REAR
+
or
-
.
"
REAR +XX
" or "
REAR -XX
" will be
displayed.
To switch off the TEST TONE
Press
TEST TONE
.
Notes:
It is advisable to set the speakers
level at
normal listening level.
"
XX
" denotes the sound level.
Switching the Dolby Pro Logic
Press
DPL (PRO LOGIC
)
repeatedly to select and cycle
through the various sound
modes.
The Dolby Pro Logic display
panel will light up with the
selection.
Dolby Surround
Dolby Center Phantom
Dolby 3 Stereo
Stereo
Dolby
Surround
Dolby Surround
This setting is for a full
Dolby Surround Pro Logic
mode.
DOLBY SURROUND
will be displayed.
Dolby Center Phantom
This setting is for use
without the center speaker.
It redistributes the center
speaker sound to the left
and right speakers,
providing conventional
stereo across the front.
DOLBY CENTER PHANTOM
will be
displayed.
Dolby 3 Stereo
Use this setting when full
surround is not required,
but a wide stereo sound is
desired. It requires only the
left, right and center
speakers.
DOLBY 3 STEREO
will be displayed.
Normal Stereo
This setting is for normal
stereo sound without
Dolby Pro Logic. It requires
only the left and right
speakers.
STEREO
will be
displayed.
Dolby Pro Logic
LEFT
CENTER
RIGHT
SURR
SURR
LEFT
CENTER
RIGHT
SURR
SURR
LEFT
CENTER
RIGHT
SURR
SURR
LEFT
CENTER
RIGHT
SURR
SURR
DPL
TEST T
PRO LOGIC
pg 001-033/P900/37-Eng
12/8/00, 1:52 PM
12