Philips FWP900 User manual - Page 29
Sleep Timer Setting
View all Philips FWP900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
English Clock/Timer 2 Press CD, TUNER or TAPE to select the desired source. G Make sure the music source has been prepared. CD - Load the disc(s).To start from a specific track, make a program (refer to "CD Operation Programming the disc tracks"). TUNER - tune to the desired preset radio station. TAPE - load the prerecorded tape into tape deck 2. 3 Press à or á on the system repeatedly to set the hour for the timer to start. 4 Press í or ë on the system repeatedly to set the minute for the timer to start. 5 Press CLOCK/TIMER to store the start time. ➜ The timer is now set and activated. ➜ TIMER will remain on the display. G At the preset time, the selected source will be played. To exit without storing the setting G Press Çon the system. Sleep Timer Setting The sleep timer enables the system to switch to Standby mode automatically at a preset time. 1 Set the clock (refer to "Clock Setting"). 2 Press SLEEP on the remote control repeatedly to select a preset time. ➜ The selections are as follows (time in minutes): 60 ™ 45 ™ 30 ™ 15 ™ OFF ™ 60 ... ➜ "SLEEP XX" or "OFF" will be displayed. "XX" is the time in minutes. 3 When you reach the desired length of time, stop pressing the SLEEP button. ➜ The Sleep Timer is now set. After this amount of time passes, the system will switch to Standby mode. To deactivate the Sleep Timer G Press SLEEP repeatedly until "OFF" is displayed, or press the STANDBY ON button. Notes: - If the selected source (CD or TAPE) is not available when preset timer is reached,TUNER will be selected automatically. - During timer setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically. To deactivate the TIMER G Press TIMER ON/OFF on the remote control. ➜ The display will show "CANCEL" and TIMER will disappear from the display. To activate the TIMER G Press TIMER ON/OFF on the remote control. ➜ The last timer setting will be shown for a few seconds and TIMER will appear on the display. pg 001-033/P900/37-Eng 29 29 12/8/00, 1:53 PM 3139 115 20411