Philips SRC2063 User manual (English) - Page 5

During initial setup 1 Make sure the receiving device is able to respond. E.g. when you try to repair the Play button for your DVD player, make sure to insert a DVD into the DVD player otherwise the Play button is not able to function. 2 Press the button that does not function, keep it pressed and immediately release it when the device responds. Repeat this for every button that does not function. • If the button still does not function as expected, try pressing it again for a longer period of time. After initial setup 1 Make sure the receiving device is able to respond. E.g. when you try to repair the Play button for your DVD player, make sure to insert a DVD into the DVD player otherwise the Play button is not able to function. 2 Select the device that you wish to operate (e.g. DVD). Press the or device selection button to select DVD. 3 Keep buttons 5 sec. and pressed simultaneously for 5 seconds. • The red Setup light lights up.The remote control is now in setup mode. 4 Press and hold the button that does not function and immediately release it when the device responds. • If the button still does not function as expected, try pressing it again for a longer period of time. 5 Press the or selection button twice to save your settings and exit setup mode. 2 x • When no button is pressed for 5 minutes or more, the remote control will exit setup mode, automatically saving all your settings. 8 EN 3 Using the universal remote controls 3.1 Buttons and functions The illustrations on page 2 gives an overview of all buttons on the remote controls.Try out the buttons you need for operating your devices. Notes • Buttons having the same functions as the buttons on your original remote control may have different namings on the SRP2003 / SRP2006 (e.g. Info / Display). • Only functions that are available on your original remote control can be used for operating your devices with the universal remote controls. 1 Setup light. Lights up when a remote control command is being sent, when you just selected a device and when the remote control is in setup mode. 2 selects available source inputs (antenna, cable, etc.). 3 device selection buttons. Select the device to be operated. 4 GUIDE e lectronic program guide. MENU menu on / off. INFO o n-screen channel information. EXIT exits / clears on-screen menu displays. 3 4 1 2 cursor up, down, left, right in a menu. OK confirms your selection. EN 9 Using the universal remote controls English