Philips SRC2063 User manual (English) - Page 6
Resetting a button to its, original function - universal remote
View all Philips SRC2063 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
A, B, C, D Context sensitive buttons, ordered following the requirements for cable boxes. A - Yellow, B - Blue, C - Red, D - Green. 5 + VOL adjusts TV volume mutes TV sound. p revious program / Last / Back. + CH next / previous channel. 6 5 rewind. 2 play. 6 fast forward. 9 stop. 0 record. pause. 4P 3P p revious (4P) / next (3P) page / track in various modes. set your Thumb ratings. 7 used after direct channel selection. some devices require ENTER to be pressed after channel selection. selects between one and two-figure channel numbers. 8 digit buttons for direct channel / track selection. 9 switches the selected device on / off. Note For some TV brands / types, the button will only turn off the TV. You will have to press a digit button (direct channel selection) to turn on the TV again. 10 EN 3.2 Resetting a button to its original function If an improved button (see chapter 2.2.2) still does not function as expected, you can always reset the button to its original function. 1 In the current device mode, keep 5 sec. digit buttons and pressed simultaneously for 5 seconds, until the red Setup light lights up. • The remote control is now in setup mode. 2 Press digit buttons , , and , in that order. • A fter each button press the red Setup light blinks once. 3 Press the button that you wish to reset twice. E.g. the 22 button. 2 x • After each button press the red Setup light blinks once. • The red Setup light will blink one more time to confirm that the button was succesfully reset to its original function. EN 11 Using the universal remote control English