Pioneer AVHP4000DVD Owner's Manual - Page 70
Digital Signal Processor, Available accessories
UPC - 012562883359
View all Pioneer AVHP4000DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Section 04 Available accessories 2 Touch BSSM on the function menu to turn BSSM on. BSSM begins to flash. While BSSM is flashing the 12 strongest broadcast stations will be stored in order from the lowest channel up. When finished, BSSM stops flashing. # To cancel the storage process, touch BSSM again. 3 Touch ESC to return to the TV picture. # To return to the previous display, touch BACK. Note Storing broadcast stations with BSSM may replace broadcast stations you have saved using P01 to P12. Digital Signal Processor Introduction of DSP adjustments You can use this unit to control multi-channel processor (e.g. DEQ-P8000), which is sold separately. ! Some functions may differ depending on the multi-channel processor connected to this unit. Important When a multi-channel processor and an optional DVD player are connected to this unit, be sure to use an optical cable (e.g., CD-AD600). 70 En 1 1 DSP display Shows the DSP function names. By carrying out the following settings/adjustments in the order shown, you can create a finely-tuned sound field effortlessly. 1 Setting the speaker setting 2 Using the position selector 3 Auto TA and EQ (auto-time alignment and auto- equalizing) 4 Adjusting the time alignment 5 Adjusting the speaker output levels using a test tone 6 Selecting a cross-over frequency 7 Adjusting the speaker output levels 8 Adjusting 3-band parametric equalizer 1 Touch AV MENU and then touch DSP MENU to display the DSP function names. The DSP function names are displayed and operable ones are highlighted.