Pioneer AVHP4000DVD Owner's Manual - Page 85
Understanding auto TA and EQ error messages, Additional Information - problems
UPC - 012562883359
View all Pioneer AVHP4000DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Additional Information Appendix iPod is not charged but operates correctly Error has occurred when connecting the iPod to this unit Check if the connection cable for iPod shorted out (e.g., not caught in metal objects). After checking, turn the ignition switch OFF and back ON or disconnect the iPod and connect again. Reconnect the iPod. Turn the ignition switch to OFF, then to ACC or ON. Update the iPod version. Additional Information Understanding auto TA and EQ error messages When correct measurement of car interior acoustic characteristics is not possible using the auto TA and EQ, an error message may appear on the display. If an error message appears, refer to the table below to see what the problem is and the suggested method of correcting the problem. After checking, try again. Message Cause Action Error. Please check MIC. Microphone is not connected. Plug the supplied microphone securely into the jack. Error. Please check front SP., Error. Please check FL SP., Error. Please check FR SP., Error. Please check center SP., Error. Please check rear SP., Error. Please check RL SP., Error. Please check RR SP., Error. Please check subwoofer The microphone cannot pick up the measuring tone of a speaker. ! Confirm that the speakers are connected correctly. ! Correct the input level setting of the power amp connected to the speakers. ! Set the microphone correctly. Error. Please check noise. The surrounding noise level is too high. ! Stop your car in a place that is as quiet as possible, and switch off the engine, air conditioner or heater. ! Set the microphone correctly. En 85