Pioneer AVHP4000DVD Owner's Manual - Page 71
Using the sound field control, Using the position selector
UPC - 012562883359
View all Pioneer AVHP4000DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Available accessories Section 04 Available accessories # To go to the next group of function names, touch NEXT. # To return to the previous group of function names, touch PREV. # When playing discs recorded with more than 96 kHz sampling frequency, you cannot use audio functions. Also, equalizer curve setting, POSITION, AUTO EQ and AUTO TA will be cancelled. # When playing discs recorded with more than 96 kHz sampling frequency, audio is outputted from front speakers only. # When selecting FM as the source, you cannot switch to SLA. # When playing other than the DVD disc, you cannot switch to DYNAMIC RANGE CONTROL. # When neither FRONT-L nor FRONT-R is selected in POSITION, you cannot switch to TIME ALIGNMENT. # When both the center speaker and the rear speaker are set to OFF in the speaker setting, you cannot switch to DOLBY PRO LOGIC II. 2 Touch ESC to return to the ordinary display. # To return to the previous display, touch BACK. Using the sound field control The SFC function creates the sensation of a live performance. ! The acoustics of different performance en- vironments are not the same and depend on the extent and contour of space through which sound waves move and on how sounds bounce off the stage, walls, floors and ceilings. At a live performance you hear music in three stages: direct sound, early reflections, and late reflections, or reverberations. Those factors are programed into the SFC circuitry to recreate the acoustics of various performance settings. 1 Press EQ and hold to switch to SFC function. # To switch to equalizer function, press EQ and hold again. 2 Press EQ to select the desired SFC mode. MUSICAL (musical)-DRAMA (drama)- ACTION (action)-JAZZ (jazz)-HALL (hall)- CLUB (club)-OFF (off) Note If the source is a 2-channel LPCM audio or a 2channel Dolby Digital audio and you select SFC effects that are most applicable for 5.1-channel audio (i.e., MUSICAL, DRAMA or ACTION), we recommend turning Dolby Pro Logic II on. On the other hand, when selecting SFC effects that are intended for use with 2-channel audio (i.e., JAZZ, HALL or CLUB), we recommend turning Dolby Pro Logic II off. Using the position selector One way to assure a more natural sound is to accurately position the stereo image, putting you right in the center of the sound field. The position selector function lets you automatically adjust the speaker output levels and inserts a delay time to match the number and position of occupied seats. When used in conjunction with the SFC, the feature will make the sound image more natural and offer a panoramic sound that envelops you. 1 Touch POSITION on the DSP function menu. 2 Touch c/d/a/b to select a listening position. Touch one of these, c/d/a/b, to select a listening position as listed in the table. Key Display c FRONT-L d FRONT-R a FRONT b ALL Position Front seat left Front seat right Front seats All seats # To cancel the selected listening position, touch the same key again. En 71