Pioneer DEH-2100IB Owner's Manual - Page 18
Initial Settings, Other Functions, Operating this unit, Adjusting initial settings, Setting the clock - set clock
UPC - 012562911489
View all Pioneer DEH-2100IB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Section 02 Operating this unit 4 Turn MULTI-CONTROL to adjust the source volume. +4 to -4 is displayed as the source volume is increased or decreased. 5 Press MULTI-CONTROL to determine the selection. # Even if the menu has been cancelled before determination, operation is settled. Initial Settings Adjusting initial settings 1 Press SRC/OFF and hold until the unit turns off. 2 Press MULTI-CONTROL and hold until CLOCK SET appears in the display. 3 Turn MULTI-CONTROL to select one of the initial settings. CLOCK SET (clock)-AUX (auxiliary input) # To return to the previous display, press DISP/BACK/SCRL. # To return to the main menu, press and hold DISP/BACK/SCRL. # To cancel initial settings, press BAND/ESC. Setting the clock Use these instructions to set the clock. 1 Use MULTI-CONTROL to select CLOCK SET in the initial setting menu. Refer to Adjusting initial settings on this page. 2 Press MULTI-CONTROL to display the setting mode. 3 Press MULTI-CONTROL to select the segment of the clock display you wish to set. Each time you press MULTI-CONTROL, one segment of the clock display is selected. Hour-Minute As you select segments of the clock display, the selected segment blinks. 4 Turn MULTI-CONTROL to put a clock right. Switching the auxiliary setting It is possible to use auxiliary device with this unit. Activate the auxiliary setting when using auxiliary device connected to this unit. 1 Use MULTI-CONTROL to select AUX in the initial setting menu. Refer to Adjusting initial settings on this page. 2 Press MULTI-CONTROL to turn AUX on. # To turn AUX off, press MULTI-CONTROL again. Other Functions Using the AUX source You can connect an auxiliary device to this unit using a stereo mini plug cable. % Insert the stereo mini plug into the input jack on this unit. Selecting AUX as the source % Press SRC/OFF to select AUX as the source. # If the auxiliary setting is not turned on, AUX cannot be selected. For more details, see Switching the auxiliary setting on this page. Turning the clock display on or off You can turn the clock display on or off. ! Even when the sources are off, the clock display appears on the display. % Press CLOCK to turn the clock display on or off. Each press of CLOCK turns the clock display on or off. # The clock display disappears temporarily when you perform other operations, but the clock display appears again after 25 seconds. 18 En