Pioneer DEH-2100IB Owner's Manual - Page 21

Installation Section 04 English Important ! Check all connections and systems before final installation. ! Do not use unauthorized parts. Use of unauthorized parts may cause malfunctions. ! Consult your dealer if installation requires drilling of holes or other modifications to the vehicle. ! Do not install this unit where : - it may interfere with operation of the vehicle. - it may cause injury to a passenger as a result of a sudden stop. ! The semiconductor laser will be damaged if it overheats. Install this unit away from hot places such as near the heater outlet. ! Optimum performance is obtained when the unit is installed at an angle of less than 60°. 60° ! When installing, to ensure proper heat dispersal when using this unit, make sure you leave ample space behind the rear panel and wrap any loose cables so they are not blocking the vents. DIN front/rear mount This unit can be properly installed either from "Front" (conventional DIN front-mount) or "Rear" (DIN rear-mount installation, utilizing threaded screw holes at the sides of unit chassis). For details, refer to the following installation methods. space behind the unit, use factory supplied mounting sleeve. 2 Secure the mounting sleeve by using a screwdriver to bend the metal tabs (90°) into place. Dashboard Mounting sleeve 3 Install the unit. Use commercially available parts when installing. Nut Filrewall or metal support Screw Metal strap Screw (M4˜8) # Make sure that the unit is installed securely in place. Unstable installation may cause this unit to malfunction, such as sound skip. DIN Front-mount Installation with metal strap and screws 1 Insert the mounting sleeve into the dashboard. When installing in a shallow space, use a supplied mounting sleeve. If there is enough En 21