Pioneer DJM-600 REFURBISHED Owner's Manual - Page 15
USING THE EFFECT/SAMPLER FUNCTIONS, Measuring BPM in Manual Mode
View all Pioneer DJM-600 REFURBISHED manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Measuring BPM in Manual Mode 7 When BPM cannot be measured in auto BPM mode: If auto BPM measurement is not possible, use the tap switch for manual input. ÷ When the tap switch is pressed in time to the music's beat, the light in both BPM measurement range displays will turn off and manual mode will go into effect. ÷ The BPM value input with the tap switch will be displayed on the effector/BPM display's lower counter, and the display on the upper counter will turn off. ÷ To return to auto BPM mode, press the BPM measurement range selector switch and set the measurement range. 7 When BPM cannot be measured during delay, echo, auto pan, auto trans, filter and flanger operations (pages 16 and 17), or during sampler operations (pages 20 and 21): If BPM cannot be measured for more than 2 seconds during effect or sampler operations, the BPM display's counter will blink. In such a case, change the effect/ sampler selector switch to AUTO BPM and use the tap switch for manual input. ÷ After the BPM value input via the tap switch has been displayed on the effect parameter/BPM display's lower counter and the effect/sampler selector switch restored to the original effect, the BPM value input will be displayed on the BPM display's upper counter. BPM can be input in manual mode if the music's BPM is known in advance. ÷ Change the effect/sampler selector switch to AUTO BPM and press the BPM measurement range selector switch and both BPM measurement range displays will turn off. ÷ If the effect/sampler parameter 1 knob (TIME) is pressed, the counter on the effect parameter/BPM display will display the BPM, with adjustment possible from the first digit. Turning the parameter 1 knob while pressing the tap switch makes it possible to adjust the BPM from the first decimal place. When the BPM value has been set and the effect/ sampler selector switch restored to the original effect, the BPM value set will be displayed on the BPM display's counter. USING THE EFFECT/SAMPLER FUNCTIONS BPM display 1234 AUTO BPM COUNTER 70-139 BPM 91-180 BPM BPM Counter BPM measurement range selector switch Effect parameter/ BPM display MASTER 1 2 3 4 MIC PARAMETER1 BPM BPM measurement range display Counter 1/2 3/4 1/1 2/1 4/1 1 2 4 8 16 BEAT 15