Pioneer DJM-600 REFURBISHED Owner's Manual - Page 19
Using an External Effector
View all Pioneer DJM-600 REFURBISHED manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Precautions: ÷ If the channel has been changed with the effect/sampler channel selector switch when delay, echo (pages 16 and 17), reverb and similar effects have been turned on, all of the reverberation of the prior channel's effects will be output. ÷ Only operate the effect/sampler selector switch when effects are off (when the effect/sampler ON/OFF switch is lit orange). Operating it with effects on could generate noise. USING THE EFFECT/SAMPLER FUNCTIONS BPM display 1234 AUTO BPM COUNTER 70-139 BPM 91-180 BPM Effect parameter/ BPM display MASTER 1 2 3 4 MIC PARAMETER1 LED % 1/2 3/4 1/1 2/1 4/1 1 2 4 8 16 BEAT Counter Beat display Effect beat selector switch ÷ Display when CH-3 has been pitch-shifted by 90%. Using an External Effector The following example is for applying external effects to music on CH-3. 1 Set the effect/sampler selector switch to SEND/ RETURN. 2 Set the effect/sampler channel selector switch to 3. ÷ LED "3" on the effect parameter/BPM display will light. 3 Set external effector parameters, etc. ÷ When headphone cue's EFFECTS/SAMPLER is pressed, effect sound can be confirmed via headphone output. 4 Adjust the return level. ÷ The return level from the external effector can be adjusted with the effect/sampler parameter 2 knob. * Effect/sampler parameter 1 knob (TIME) will not function. 5 Turn on the effect/sampler ON/OFF switch. ÷ The effect/sampler ON/OFF switch will blink orange, and the external effect will be applied to music on CH-3. ÷ Pressing the switch once more will turn the effect off. BPM display 1234 AUTO BPM COUNTER 70-139 BPM 91-180 BPM Effect parameter/ BPM display MASTER 1 2 3 4 MIC PARAMETER1 LED 1/2 3/4 1/1 2/1 4/1 1 2 4 8 16 BEAT ÷ Display when an external effect has been applied to CH-3. 19