Pioneer DJM-600 REFURBISHED Owner's Manual - Page 23

Starting with the Channel Fader 1 Turn on the fader start switch (CH-1 or CH-2) of the channel connected to the CD player to be controlled. 2 Push the channel fader volume control all the way to the bottom. 3 Set the cue point of the CD player and set the player to standby at it. 4 When you want to start the player, push up the channel fader volume control and the CD player will begin playing. Precaution: ÷ Channels selected with the cross fader ASSIGN A and B switches cannot be started with the channel fader. USING THE FADER START FUNCTION The following is an example of starting a CD player connected to CH-1. CH-1 Example: 10 CH-1 9 8 7 OFF ON 6 5 4 3 Fader start switch 2 1 0 Channel fader volume control If cue points have been set in advance when using the CDJ-100S and CDJ-700S, it is not necessary to leave the CD player on standby at the cue point. If the channel fader volume is returned to its original position after playing has started, the CD player will return to the cue point and be on standby. Starting with the Cross Fader 1 Turn on the fader start switch (CH-1 or CH-2) of the channel connected to the CD player to be controlled or of the sampler. 2 Using the cross fader ASSIGN A and B switches, select the channel (CH-1 or CH-2) that the CD player is connected to or the sampler. 3 Slide the cross fader volume all the way in direction opposite the source you want to start. In the following example, startup is done with the CD player connected to CH-1 set to ASSIGN A. Example: 2 1 THRU 3 4 SAMPLER CROSS FADER ASSIGN A ASSIGN A switch A B Cross fader volume control 4 For starting a CD player, set its cue point and set it to standby at this cue point. For starting a sampler, select the type of sample play (SINGLE, LOOP or STRETCH LOOP) with the effect/sampler selector switch. When the type of sample play is selected with the effect/ sampler selector switch, the effect/sampler ON/OFF switch will light green. 5 Use the cross fader curve selector switch to select the cross fader startup curve. 6 When the cross fader volume control is slid in the opposite direction as in "3", CD player or sampler play will begin. 2 1 THRU 3 4 SAMPLER CROSS FADER ASSIGN A ASSIGN A switch A B Cross fader volume control If cue points have been set in advance when using the CDJ-100S and CDJ-700S, it is not necessary to leave the CD player on standby at the cue point. If the cross fader volume is returned to its original position after playing has started, the CD player will return to the cue point and be on standby. 23