Pioneer FH-P4200MP Owner's Manual - Page 35
Introduction of audio, adjustments, Using balance adjustment, Audio Adjustments
UPC - 012562728421
View all Pioneer FH-P4200MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Audio Adjustments Section 09 English Introduction of audio adjustments when subwoofer output is turned on in the Phase:NOR. # To return to the display of each source, press BAND. 1 23 1 Loud indicator Appears in the display when loudness is turned on. 2 Audio display Shows the audio adjustments status. 3 SW indicator Shows when the subwoofer output is turned on. % Press AUDIO to display the audio function names. Press AUDIO repeatedly to switch between the following audio functions: FAD (balance adjustment)Loud (loudness) NoFAD (nonfading output on/off setting) NoFAD: 0 (nonfading output setting) Phase:NOR (subwoofer setting)80 : 0 (subwoofer cut-off frequency)SLOPE (subwoofer slope)F-HPF (front high pass filter cut-off frequency)F-SLP (front high pass filter slope)R-HPF (rear high pass filter cut-off frequency)R-SLP (rear high pass filter slope) # When the subwoofer controller setting is only P/O:Full, you can switch to the nonfading output on/off setting. (Refer to page 44.) # You can select the nonfading output setting only when nonfading output is turned on in the nonfading output on/off setting. # When the subwoofer controller setting is only P/O:Full, you cannot switch to Phase:NOR. (Refer to page 44.) # You can select the 80 : 0 (subwoofer cut-off frequency) and the SLOPE (subwoofer slope) only Note If you do not operate the audio function within about 30 seconds, the display is automatically returned to the source display. Using balance adjustment You can select a fader/balance setting that provides an ideal listening environment in all occupied seats. 1 Press AUDIO to select FAD. Press AUDIO until FAD appears in the display. # If the balance setting has been previously adjusted, BAL will be displayed. 2 Press a or b to adjust front/rear speaker balance. Each press of a or b moves the front/rear speaker balance towards the front or the rear. FAD :F25 FAD :R25 is displayed as the front/ rear speaker balance moves from front to rear. # FAD : 0 is the proper setting when only two speakers are used. 3 Press c or d to adjust left/right speaker balance. Each press of c or d moves the left/right speaker balance towards the left or the right. BAL :L25 BAL :R25 is displayed as the left/ right speaker balance moves from left to right. En 35