Pioneer FH-P4200MP Owner's Manual - Page 36
Adjusting loudness, Using nonfading output, Using subwoofer output, Audio Adjustments
UPC - 012562728421
View all Pioneer FH-P4200MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Section 09 Audio Adjustments Adjusting loudness Loudness compensates for deficiencies in the low- and high-sound ranges at low volume. 1 Press AUDIO to select Loud. Press AUDIO until Loud appears in the display. 2 Press a to turn loudness on. Loud :ON appears in the display. 3 Press b to turn loudness off. Loud :OFF appears in the display. 1 Press AUDIO to select nonfading output setting. Press AUDIO until NoFAD: 0 appears in the display. 2 Press a or b to adjust the nonfading output level. Each press of a or b increases or decreases the level of the non fading. +6 24 is displayed as the level is increased or decreased. Press a or b until you see the desired value displayed. Using nonfading output When the nonfading output setting is on, the audio signal does not pass through this units low pass filter (for the subwoofer), but is outputted through the RCA output. 1 Press AUDIO to select nonfading output on/off setting. When the subwoofer controller setting is only P/O:Full, you can switch to the nonfading output on/off setting. (Refer to page 44.) Press AUDIO until NoFAD appears in the display. 2 Press a to turn nonfading output on. NoFAD:ON appears in the display. Nonfading output is now on. # To turn nonfading output off, press b. Adjusting nonfading output level When the nonfading output is on, you can adjust the level of nonfading output. Using subwoofer output This unit is equipped with a subwoofer output which can be turned on or off. When a subwoofer is controlled with this unit, first, switch the RCA output setting to subwoofer, then turn the subwoofer output on. For more details, see Switching the RCA output setting on page 44. 1 Press AUDIO to select Phase:NOR. Press AUDIO until Phase:NOR appears in the display. # When the RCA output setting is P/O:Subw, you can select Phase:NOR. 2 Press a to turn the subwoofer output on. Phase:NOR appears in the display. Subwoofer output is now on. # To turn subwoofer output off, press b. 3 Press c or d to select the phase of subwoofer output. Press c to select reverse phase and Phase:REV appears in the display. Press d to select normal phase and Phase:NOR appears in the display. 36 En