Pioneer MEP-7000 Control Manual for the DJS Software - Page 10

2 2-4 Operating the DJS Mixer You can use the MEP-7000 to operate the mixer on the [DJ Play] screen in DJS. 1 MIX Button 3 Select UP button 5 Rotary Selector 2 Function Buttons (6) : -［CUT-IN］ -［ZIP］ -［ECHO］ -［CROSS FADE］ -［BPM SYNC］ -（EMPTY） 4 Select DOWN button 6 LOAD A Button 7 LOAD B Button 1 Press the MIX button. 2 Set the mixing parameters. • Use the function buttons, select UP button, and select DOWN button to set up mixing. Functions that are Linked with the [DJ Play] Screen (Mix Functions) MEP-7000 Operation Buttons Function [CUT-IN] Function [ZIP] Function [ECHO] Function [CROSS FADE] Function [BPM SYNC] Select UP Button Select DOWN Button Functions that are Linked with the [DJ Play] screen MIX Mode : CUT-IN MIX Mode : ZIP MIX Mode : ECHO MIX Mode : CROSS FADE The playback speed for the slave is merged to that of the master. BEAT ADJUST : Player A BEAT ADJUST : Player B 3 Press either the LOAD A or the LOAD B button. • LOAD A Button (Start Mix or Auto Mix) : Starts the cross fader in the [DJ Play] screen moving from the Player B side toward Player A. When Player A is the master, it does not start moving. While it is moving, if you decide you want to return in the other direction, press the LOAD B button. • LOAD B Button (Start Mix or Auto Mix) : Starts the cross fader in the [DJ Play] screen moving from the Player A side toward Player B. When Player B is the master, it does not start moving. While it is moving, if you decide you want to return in the other direction, press the LOAD A button. Specify the speed of cross fader movement (beats). The cross fader movement speed (beats) can be specified for each mix mode. If you press the rotary selector, the menu for selecting the possible beats is displayed on the [DJ Play] screen; rotate the rotary selector to your selection and then press the rotary selector. Manual Operation of the Cross Fader Instead of pressing the LOAD A or the LOAD B buttons, you can rotate the rotary selector to manually move the cross fader. Rotating it clockwise moves the cross fader's slider to the right, counterclockwise to the left. During a Mix or even an Auto Mix, you can rotate the rotary selector to move the cross fader manually. Note DJS Mixer Functions (Internal Mixer) When you use the DJS mixer functions, it makes the DJS settings on the internal mixer. For more information, please refer to sections "1-1 Using the DJS Mixer Function" and "9-4 Mixer and Sound Card Settings" in your DJS User's Manual. MIX Button If you press the MIX button, the MIX screen is displayed in the center display. Function Buttons On the [MIX] menu, four mix mode selections and BPM sync are assigned. When using an external mixer Only the BPM sync function can be used when the DJS mixer is set to an external mixer. Note Master & Slave The first player that starts playing is the master, the other player becomes the slave. The master and slave switch roles under the following circumstances. ・When the cross fader is moved all the way to the slave side ・When the master is paused while both players are playing together ・When the song on the master is changed while both players are playing together BEAT Adjust (Player A - Player B) While listening to the song being played, set the beat location. Press either the select UP or the select DOWN button on the first beat of a 4-count. Switching between MIX and AUTO MIX Toggle between Mix and Auto Mix by rightclicking on either the [Mix] or the [Auto Mix] button on the [DJ Play] screen. Mix The cross fader moves in the specified number of beats. Auto Mix The cross fader moves in the specified number of beats. During Auto Mix, the playback speed and beat position of the slave are automatically synchronized with the playback speed and beat position of the master. 10 DJS Ver. 1.600