Pioneer PRO-930HD Owner's Manual - Page 82
Useful Remote Control Features
View all Pioneer PRO-930HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
13 Useful Remote Control Features Useful Remote Control Features Learning function of the remote control unit You can operate the connected AV products (AV Receiver, Cable Box, SAT tuner, VCR, DVD, DVD recorder, LD) using the learning function of your remote control unit. This remote control unit has a function that can memorize each remote control code. 2 to 5 cm (0.8 to 2.0 inches) Remote control (Supplied accessory) Remote control of AV product Using the learning function 1 Slide the Mode switch to match the device whose remote control signal you want to be learned. 2 Press EDIT/LEARN and 2 at the same time. • The LED flashes. 3 Press a button to be learned. • The LED lights up. • For the functions that can be learned, see pages 84 to 88. • When learning is finished, the LED starts flashing again. 4 Press EDIT/LEARN again to exit the Learn mode. Presetting manufacturer codes 1 Slide the Mode switch to match the device to which you want to preset the remote control signal. 2 Press EDIT/LEARN and 1 at the same time. • The LED flashes. 3 Press 0 - 9 to enter the manufacturer code. See page 83. • Preset mode is finished once the LED no longer lights up. NOTE • To exit the Edit mode before it is complete, press EDIT/ LEARN again. • If the Mode switch selection is changed when in the Edit mode, the Edit mode is canceled. • If no operation is performed for more than one minute, the Edit mode is canceled. • When you enter a code not listed, the LED flashes quickly. • If the table on page 83 does not include your device's manufacturer or the remote control does not work, you can make the memory learn its signal by the Learn mode. • The initial mode is "000" (PIONEER). NOTE • To exit the Learn mode before it is complete, press EDIT/ LEARN again. • If the Mode switch selection is changed when in the Learn mode, the Learn mode is canceled. • If no operation is performed for more than one minute, the Learn mode is canceled. • It takes about 2 seconds to finish code transmission. Do not interrupt it halfway. Wait until the LED flashes again. • You can reset all learned codes to the factory defaults. When not in the Learn mode, press and hold TV , and then press FAVORITE A (blue) and FAVORITE D (yellow) at the same time. 82 En