Plantronics Savi 440 User Guide - Page 15

Device Settings - Headset Tab, Device Settings - Advanced Tab - issues

Page 15 highlights

To change the PC Audio Bandwidth default in the software, go to: Start > Programs > Plantronics > Plantronics Control Panel > Device Settings - USB adapter. You also can toggle between narrowband and wideband audio by doing a short press (less than one second) followed by a long press (more than three seconds) on the USB adapter subscription button while it is in an idle state. The USB adapter light will flash red for four seconds upon entering narrowband mode and flash green for four seconds upon entering wideband mode. When switching between narrowband and wideband audio, you must re-establish the audio link for the changes to take effect. Feature Set Lock See the Device Settings - Security Tab for more information. Device Settings - Headset Tab Options Feature General Mute Tone Ringtone PC Volume System Tones Second Inbound Call Settings Standard/Low/Off Sound 1/Sound 2/Sound 3 Standard/Low/Off Standard/Low/Off Ring Continuously/Ring Once/Ignore Default Off Sound 2 Standard Standard Ring Continuously Device Settings - Advanced Tab Options Feature Audio Protection Anti-Startle G616* Audio Limiting* Feature Set Lock Hours on Phone Per Day Password (required) Settings Selected/Not selected Selected/Not selected 80 dB/85dB/Off 2/4/6/8 Locked/Unlocked Default Not selected Not selected Off 8 Unlocked *The Audio and G616 Limiting features are supported in over-the-head mode only and are based on a typical headset and recommended acoustic coupling between the headset and the ear. Please see Headset setup for optimal wearing position. Anti-Startle Anti-startle provides advanced hearing protection against sudden loud sounds. When Anti-startle is SELECTED, the system identifies and eliminates sudden loud sounds and rapidly reduces them to a comfortable level. When Anti-startle is NOT SELECTED, the headset limits sound levels at 118 dBA to protect your hearing. Plantronics Savi User Guide G616 G616 Acoustic Limiting provides additional hearing protection against acoustic shock. When G616 Acoustic Limiting is SELECTED, the system provides additional acoustic shock protection. Sound levels are limited to 102 dBA as recommended in the G616:2006 guideline issued by the Australian Communications Industry Forum (ACIF). When G616 AudioLimiting is NOT SELECTED, the headset limits sound levels at 118 dBA to protect your hearing. 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22

Plantronics Savi User Guide
15
Device Settings – Headset Tab
Options
Feature
Settings
Default
General
Mute Tone
Standard/Low/Off
Off
Ringtone
Sound 1/Sound 2/Sound 3
Sound 2
PC Volume
Standard/Low/Off
Standard
System Tones
Standard/Low/Off
Standard
Second Inbound Call
Ring Continuously/Ring Once/Ignore
Ring Continuously
Device Settings – Advanced Tab
Options
Feature
Settings
Default
Audio Protection
Anti-Startle
Selected/Not selected
Not selected
G616*
Selected/Not selected
Not selected
Audio Limiting*
80 dB/85dB/Off
Off
Hours on Phone Per Day
2/4/6/8
8
Feature Set Lock
Password (required)
Locked/Unlocked
Unlocked
*The Audio and G616 Limiting features are supported in over-the-head mode only and are based on a typical headset and recommended acoustic coupling between the headset
and the ear. Please see Headset setup for optimal wearing position.
Anti-Startle
Anti-startle provides advanced hearing protection against sudden
loud sounds. When Anti-startle is SELECTED, the system
identifies and eliminates sudden loud sounds and rapidly reduces
them to a comfortable level. When Anti-startle is NOT SELECTED,
the headset limits sound levels at 118 dBA to protect your
hearing.
G616
G616 Acoustic Limiting provides additional hearing protection
against acoustic shock. When G616 Acoustic Limiting is
SELECTED, the system provides additional acoustic shock
protection. Sound levels are limited to 102 dBA as recommended
in the G616:2006 guideline issued by the Australian
Communications Industry Forum (ACIF). When G616 Audio-
Limiting is NOT SELECTED, the headset limits sound levels at
118 dBA to protect your hearing.
To change the PC Audio Bandwidth default in the software, go
to: Start > Programs > Plantronics > Plantronics Control Panel
> Device Settings – USB adapter. You also can toggle between
narrowband and wideband audio by doing a short press (less
than one second) followed by a long press (more than three
seconds) on the USB adapter subscription button while it is in an
idle state. The USB adapter light will flash red for four seconds
upon entering narrowband mode and flash green for four seconds
upon entering wideband mode. When switching between
narrowband and wideband audio, you must re-establish the audio
link for the changes to take effect.
Feature Set Lock
See the Device Settings – Security Tab for more information.