Plantronics Voyager 4245 Office User Guide - Page 8

Pair Pair again to base Your headset comes pre-paired to the base. To pair again: 1 With your headset powered off, press the Call button until you hear "pairing." 2 Put your base into pair mode by pressing and holding the Bluetooth pairing button on the back of your base for 2 seconds until the display panel's Bluetooth icon flashes blue and red. Pairing is successful when you hear "pairing successful" and "base connected" and the display panel's Bluetooth icon turns solid blue. NOTE Your headset can pair with up to 8 devices but only maintain 2 connections simultaneously; this includes the base. Pair to mobile device 1 To put your headset in pair mode, first power off your headset by pressing the Call button until you hear "power off." 2 Press the Call button until you hear "pairing" and the headset LEDs flash red and blue. 3 Activate Bluetooth on your phone and set it to search for new devices. • iPhone Settings > Bluetooth > On* • Android Settings > Bluetooth: On > Scan for devices* NOTE *Menus may vary by device. 4 Select "Poly V4240 Series." If necessary, enter four zeros (0000) for the passcode or accept the connection. Once successfully paired, you hear "pairing successful" and the headset LEDs stop flashing. NOTE Your headset can pair with up to 8 devices but only maintain 2 connections simultaneously; this includes the base. Pair mode With your headset powered off, press the Call button until you hear "pairing." 8