Poulan 358.351080 User Manual - Page 21

CUSTOMER RESPONSIBILITIES REPLACE FUEL FILTER (Fig. 33, 34 & 35) The fuel filter shouldbe replaced after each season,Never operate your saw without a fuel filter. Be careful not to damage fuel line while removingthe fuel filter. Pliers \ • Run fuel tank dry of fuel before proceedingwith this step. • Remove fuel cap and allowit to hang to side of motor. • Using a small pair of needle nose pliers, grasp fuel cap retainer, holding it in tank opening and pull out. ÷.... • With cap out of tank, use a small section of bent wire similar to that shown in the illustrationto catch fuel line and slowly pull from tank.When fuel filter appears in opening, grasp with fingersand remove from tank. • Once filter is out of tank, hold fuel line close to fuel filter. Fil! Cap Remove fuel filter by twisting arid pulling at the same time. • Replace fuel filter. • Reverse process for installation. Figure33 Figure34 Fuel Line Barrel Filter Neck _ _) Figure35 Fuel Filter •} :: :%: .-.,,Z = - 21 -