Poulan 532430614 User Manual - Page 1

ELECTRIC DUMP SYSTEM ASSEMBLY KIT MONTAGEKIT FÜR DAS ELEKTRISCHE AUSKIPPSYSTEM KIT DE MONTAGE DU SYSTÈME DE BASCULEMENT ÉLECTRIQUE KIT DE SISTEMA DE DESCARGA ELÉCTRICO KIT PER IL MONTAGGIO DI UN SISTEMA DI RACCOLTA ELETTRICO MONTAGESET ELEKTRISCH STORTSYSTEEM LOOSE PARTS NOT ASSEMBLED 532 42 82-40 532 43 04-44 532 43 04-24 532 43 27-55 819 13 20-12 532 43 07-70 873 90 06-00 872 14 06-22 532 43 06-66 532 42 82-39 532 42 82-38 532 43 04-22 532 12 47-56 532 00 49-29 532 12 47-88 TO RETROFIT TRACTOR WITH ELECTRIC DUMPING SYSTEM KIT NOTE: Assembly instructions for tractors factory equipped with the electric dump system begin with step 17. 1. Begin by removing the battery cover on the left side of the unit. The cover is removed by pushing back on the area in front of the cup holder and then the cover will swing upwards. 2. Remove the battery connector hardware using a 7/16" wrench and lift the battery out. CAUTION: To avoid arcing the battery, always remove the negative lead first before attempting to remove the positive lead. 3. Remove the bagger and set it down on the ground. 4. Remove the clip and clevis pin from the base of the dump handle and then remove the dump handle from the top of the bagger. 5. Using a Phillips head screw driver and 3/8" wrench, remove the upper bagger handle. 6. Using a Phillips head screw driver and 3/8" wrench, remove the rear bagger handle. 7. Remove the bagger top from the assembly. 532 43 20-32 Rev. 1