Poulan PR625Y22RHP Owner Manual - Page 16

OPERATION 3. Secure rear of side discharge deflector to lawn mower housing with knob. • Mower is now ready for side discharging operation. SIMPLE STEPS TO REMEMBER WHEN CONVERTING YOUR 18" HI-VAC: FOR MULCHING 1. Grass catcher, discharge chute and side discharge deflector removed. 2. Mulcher door secured to mower hous- ing with knob. FOR REAR BAGGING 1. Side discharge deflector removed. 2. Grass catcher and discharge chute installed with discharge chute secured to lawn mower housing with knob. FOR SIDE DISCHARGING 1. Grass catcher and discharge chute removed. 2. Side discharge deflector installed and secured to mower housing with knob. CAUTION: Do not run your lawn mower without mulcher door closed; side discharge deflector installed, or discharge chute and approved grass catcher in place. Never attempt to operate the lawn mower with mulcher door removed or propped open. TO EMPTY GRASS CATCHER 1. Remove grass catcher with clippings from lawn mower using both front and center of handle as shown. 2. Empty clippings from grass catcher. 3. Reinstall grass catcher on rear door. NOTE: Do not drag the bag when emptying; it will cause unnecessary wear. Handle 21" (53cm) HI-VAC MODELS: Your lawn mower was shipped ready to be used as a mulcher. To convert to rear bagging or side discharging: REAR BAGGING 1. Remove knob securing mulcher door to lawn mower housing. Rear handle Crossbar Grass catcher Round door Discharge chute Knob Threaded stud Mulcher door 2. Open mulcher door and insert tabs of discharge chute into hinge bracket opening and position rear of chute over threaded stud. Discharge chute tabs Hinge bracket Mulcher door 16