Poulan PR625Y22RHP Owner Manual - Page 7
Assemble Grass Catcher, Rear Discharge Mowers Only, Important, Install Rear Wheels, High Wheel
View all Poulan PR625Y22RHP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
ASSEMBLY INSTALL STARTER ROPE (MODELS EQUIPPED WITH T-KNOB) • Loosen T-knob. • Hold control bar against upper handle. • Slowly pull engine starter rope out until rope will slip into loop of rope guide. • Tighten T-knob. INSTALL REAR WHEELS ("HIGH WHEEL" MOWERS ONLY) Some high wheel models require washers which will be provided in a parts bag. If provided, install washers on the axle first as shown. • Install one (1) rear wheel on the axle of rear wheel adjuster. • Install 3/8-16 locknut and tighten se- curely. • Repeat procedure for other rear wheel. Axle O-Ring Control bar Upper handle Rope guide T-Knob Engine starter rope Flanged locknut Washer Wheel assembly ASSEMBLE GRASS CATCHER (REAR DISCHARGE MOWERS ONLY) IMPORTANT: If your model lawn mower is mulcher ready, the mulcher plate or plug must be removed before using mower as a bagger. To convert mower to bagging or discharging, see the Operation section in this manual. Look at the different grass catcher illustrations that follow. Determine which type of grass catcher you have and follow the appropriate instructions. Frame handle Vinyl bindings 7 Frame opening