ProForm 1050t Treadmill English Manual - Page 9

5. With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the Frame (55) so that the treadmill is more stable; do not fully fold the Frame yet. Attach a Wheel (96) to the Base (95) with a 3/8" x 2" Bolt (8) and a 3/8" Nut (10). Do not overtighten the Nut; the Wheel must turn freely. Press a Base Cap (89) into the Base (95). 5 89 8 55 95 96 10 6. Hold a Bolt Spacer (14) inside the lower end of 6 the Left Upright (84). Insert a 3/8" x 4" Patch Bolt (7) with a 3/8" Star Washer (11) into the Left Upright and the Bolt Spacer. Repeat this 7 84 step with a second Bolt Spacer (14), 3/8" x 4" Patch Bolt (7), and 3/8" Star Washer (11). 11 88 Hold the Left Upright Spacer (88) and the Left Upright (84) against the Base (95). See inset drawings B and C in step 3. Make sure that the 14 Left Upright Spacer sits flush against the Base. If necessary, turn the Left Upright 95 Spacer and try again. Tighten the 3/8" x 4" Patch Bolts (7) until the heads of the Patch Bolts touch the Upright; do not fully tighten the Patch Bolts yet. With the help of a second person, tip the treadmill so that the Base (95) is flat on the floor. 9