ProForm 130 Elliptical English Manual - Page 6
Carriage Bolts 82 and two M10 Nylon Locknuts 81.
View all ProForm 130 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
1. To make assembly easier, read the information on page 5 before you begin assembling the elliptical exerciser. While another person lifts the Base (1), attach the Front Stabilizer (6) to the Base with two M10 x 80mm Carriage Bolts (82) and two M10 Nylon Locknuts (81). 1 82 6 81 81 1 2. Remove the indicated screw and the shipping bracket 2 from the Base (1). Discard the screw and the shipping bracket. Next, tighten the Base Foot (26) into the Base (1) as far as possible. 1 26 Screw Shipping Bracket 3. Attach the Rear Stabilizer (7) to the Frame (2) with 3 two M10 x 127mm Button Screws (83). Next, hold the handle on the Frame (2), press the Latch Button (68), and lower the Frame until the Rear Stabilizer (7) is resting on the floor. 83 7 Handle 2 68 6