ProForm 14.0 Mme Elliptical English Manual - Page 10
Tip: Avoid pinching the Right Pulse Wire
View all ProForm 14.0 Mme Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
5. Identify the Right Handrail (5), and orient it as shown. While a second person holds the Right Handrail (5) near the Upright (2), tie the indicated wire tie to the Right Pulse Wire (80). Then, pull the other end of the wire tie upward out of the top of the Upright. See the inset drawing. Have a second person hold the Right Rail Cover (7) out of the way. Insert the lower end of the Right Handrail (5) into the opening between the Right Outer Shield (17) and the Right Inner Shield (19). Tip: Avoid pinching the Right Pulse Wire (80). Attach the Right Handrail (5) to the Upright (2) with four M8 x 13mm Screws (62); do not tighten the Screws yet. Attach the Left Handrail (4) in the same way. 5 Avoid pinching 4 the wires 7 5 19 17 2 Wire Tie 62 80 5 62 6. Attach the Right Handrail (5) to the Frame (1) with three M10 x 20mm Screws (61). Do not 6 tighten the Screws yet. Attach the Left Handrail (4) in the same way. Next, attach the Upright (2) with four M10 x 4 20mm Screws (61); do not tighten the Screws yet. 61 5 61 1 2 61 10