ProForm 14.0 Mme Elliptical English Manual - Page 9
Orient the Rear Upright Cover 21 as shown.
View all ProForm 14.0 Mme Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
3. Orient the Frame Cover (54) as shown, and slide it downward onto the Frame (1). Press the posts on the Frame Cover into the indicated holes in the Frame. Next, orient the Upright (2) as shown. While a second person holds the Upright near the Frame (1), connect the Upper Wire Harness (81) to the Lower Wire Harness (82). Tip: Avoid pinching the Wire Harnesses (81, 82). Gently pull the upper end of the Upper Wire Harness (81) to remove any slack while you insert the Upright (2) into the Frame (1). 3 81 Avoid pinching the wires Holes 2 81 54 82 1 4. Orient the Rear Upright Cover (21) as shown. Tip: Avoid pinching the wires. Attach the Rear Upright Cover (21) to the Upright (2) with four M4 x 16mm Screws (67); start all the Screws, and then tighten them. Next, press the Front Upright Cover (20) into the Rear Upright Cover (21), and attach it to the Upright (2) with an M4 x 16mm Screw (67). 4 Avoid pinching the wires 21 20 67 67 2 9