ProForm 14.0 Mme Elliptical English Manual - Page 8
Assembly
View all ProForm 14.0 Mme Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
ASSEMBLY • To hire an authorized service technician to assemble this product, call 1-800-445-2480. • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish all assembly steps. • Left parts are marked "L" or "Left" and right parts are marked "R" or "Right." • To identify small parts, see page 7. • In addition to the included tool(s), assembly requires the following tools: one Phillips screwdriver one rubber mallet Assembly may be easier if you have a set of wrenches. To avoid damaging parts, do not use power tools. 1. Go to www.proformservice.com/registration on your computer and register your product. 1 • activates your warranty • saves you time if you ever need to contact Customer Care • allows us to notify you of upgrades and offers Note: If you do not have Internet access, call Customer Care (see the front cover of this manual) and register your product. 2. If there are shipping brackets attached to the Frame (1) (only one side is shown), remove the 2 screws from the shipping brackets, and discard the screws and the shipping brackets. Then, tighten the four Leveling Feet (52) (only one is shown) into the underside of the Frame (1). 1 8 52 Shipping Bracket Screw