ProForm 18.0 Re Elliptical English Manual - Page 10

Attach the Left Upper Body Arm 47 to

Page 10 highlights

5. Tip: Avoid pinching the wires. Slide the Upright (4) onto the Frame (1). 5 Attach the Upright (4) with eight M10 x 20mm Screws (91) and eight M10 Split Washers (105). Do not tighten the Screws yet. Slide the Upright Cover (81) downward. Do not press the Upright Cover into the Left and Right Front Shields (73, 74) yet. 81 105 91 73, 74 Avoid pinching the wires 105 91 105 4 1 6. Identify the Right Upper Body Arm (61) and the Right Upper Body Leg (60) and orient them as 6 shown. Attach the Right Upper Body Arm (61) to the Right Upper Body Leg (60) with three M8 x 43mm Bolts (96) and three M8 Jam Nuts (102). Make sure that the Jam Nuts are in the indicated hexagonal holes. Do not tighten the Bolts yet. Attach the Left Upper Body Arm (47) to the Left Upper Body Leg (46) in the same way. 47 61 46 102 96 Hexagonal Holes 60 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

10
5.
Tip: Avoid pinching the wires.
Slide the
Upright (4) onto the Frame (1).
Attach the Upright (4) with eight M10 x 20mm
Screws (91) and eight M10 Split Washers (105).
Do not tighten the Screws yet.
Slide the Upright Cover (81) downward.
Do not
press the Upright Cover into the Left and
Right Front Shields (73, 74) yet
.
5
105
105
105
91
91
73, 74
Avoid pinching
the wires
4
1
81
6.
Identify the Right Upper Body Arm (61) and the
Right Upper Body Leg (60) and orient them as
shown.
Attach the Right Upper Body Arm (61) to the
Right Upper Body Leg (60) with three M8 x
43mm Bolts (96) and three M8 Jam Nuts (102).
Make sure that the Jam Nuts are in the indi-
cated hexagonal holes. Do not tighten the
Bolts yet.
Attach the Left Upper Body Arm (47) to the
Left Upper Body Leg (46) in the same way.
6
Hexagonal
Holes
60
61
96
102
47
46