ProForm 18.0 Re Elliptical English Manual - Page 15

15. Attach the Front Console Cover (79) around the Upright (4) by pressing the tabs on the 15 Front Console Cover into the Rear Console Cover (80). 79 80 4 16. See step 6. Tighten the six M8 x 43mm Bolts (96). 16 See step 5. Tighten the eight M10 x 20mm Screws (91). Identify the Right Front and Rear Arm Covers (65, 66). Attach the Right Front Arm Cover (65) to the Right Upper Body Arm (61) with two M4 x 16mm Screws (101). Attach the Right Rear Arm Cover (66) around the Right Upper Body Arm (61) by pressing the tabs on the Right Rear Arm Cover into the Right Front Arm Cover (65). Attach the Left Front and Rear Arm Covers (67, 68) in the same way. Then, slide the Upright Cover (81) downward and press it into the Left and Right Front Shields (73, 74). 68 67 101 66 81 61 65 73, 74 17. Make sure that all parts of the elliptical are properly tightened. Note: Extra parts may be included. To protect the floor or carpet from damage, place a mat under the elliptical. 15