ProForm 3.8 Treadmill Uk Manual - Page 7

2. With the help of a second person, carefully tip 2 the treadmill onto its left side. Partially fold the Frame (56) so that the treadmill is more stable; do not fully fold the Frame yet. Remove and discard the two indicated bolts (A) and the shipping bracket (B). Cut the tie securing the Upright Wire (38) to the Base (83). Locate the tie in the indicated hole in the Base, and use the tie to pull the Upright Wire out of the hole. Attach a Base Pad (81) to the Base (83) in the location shown with a 1" Tek Screw (2) and a Base Pad Spacer (13). Then, attach another Base Pad (81) with only a 1" Tek Screw (2). B Hole 83 56 13 81 2 3. Attach a Wheel (84) with a 3/8" x 2" Bolt (4) and 3 the 3/8" Nut (8) that you removed in step 1. Do not overtighten the Nut; the Wheel must turn freely. 83 4 84 8 A 38 81 2 Tie 4. Identify the Right Upright (78) and the Right 4 Upright Spacer (79), which are marked with stickers. Insert the Upright Wire (38) through the Right Upright Spacer as shown. 38 See the inset drawing. Tie the wire tie in the Right Upright (78) securely around the end of the Upright Wire (38). With the help of a second 83 person, hold the Right Upright near the Base (83). Then, pull the other end of the wire tie until the Upright Wire is routed completely through the Right Upright. 38 7 78 Wire Tie 78 38 79