ProForm 3.8 Treadmill Uk Manual - Page 8

5. Hold a Bolt Spacer (80) inside the lower end of the Right Upright (78). Insert a 3/8" x 4 1/2" Bolt 5 (6) with a 3/8" Star Washer (9) into the Right Upright and the Bolt Spacer. Repeat this step 78 with a second Bolt Spacer (80), 3/8" x 4 1/2" Bolt (6), and 3/8" Star Washer (9). Hold the Right Upright Spacer (79) and the Right Upright (78) against the Base (83). Be careful not to pinch the Upright Wire (38). Finger tighten the 3/8" x 4 1/2" Bolts (6); do not fully tighten the Bolts yet. Press a Base Endcap (77) into the Base (83). 83 6 9 38 80 80 77 79 6. With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the Frame (56) so the treadmill is more stable; do not fully fold the Frame yet. Remove and discard the two indicated bolts (A) and the shipping bracket (B). Attach a Base Pad (81) to the Base (83) in the location shown with a 1" Tek Screw (2) and a Base Pad Spacer (13). Then, attach another Base Pad (81) with only a 1" Tek Screw (2). Attach a Wheel (84) with a 3/8" x 2" Bolt (4) and the 3/8" Nut (8) that you removed in step 1. Do not overtighten the Nut; the Wheel must turn freely. 6 A 81 2 B 83 56 4 13 84 2 81 8 7. With the help of a second person, hold a Bolt Spacer (80) inside the lower end of the Left Upright (74). Insert a 3/8" x 4 1/2" Bolt (6) with a 3/8" Star Washer (9) into the Left Upright and the Bolt Spacer. Repeat this step with a second Bolt Spacer (80), 3/8" x 4 1/2" Bolt (6), and 3/8" Star Washer (9). Orient the Left Upright (74) and the Left Upright Spacer (76) as shown. Hold the Left Upright Spacer and the Left Upright against the Base (83). Finger tighten the two 3/8" x 4 1/2" Bolts (6); do not fully tighten the Bolts yet. Press a Base Endcap (77) into Base (83). 7 6 9 80 80 77 83 74 76 8