ProForm 300 Cr Bike English Manual - Page 10
Note: The Patch Screws and Washers may
View all ProForm 300 Cr Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
8. Tip: Avoid pinching the Pulse Wire (58). Attach the Backrest (8) to the Seat Carriage (3) with two M6 x 18mm Patch Screws (77) and two M6 x 42mm Patch Screws (51). Tip: First tighten the M6 x 18mm Patch Screws (77), and then tighten the M6 x 42mm Patch Screws (51). See step 7. Tighten the M10 Locknuts (64). 8 8 51 77 3 58 9. Attach the Seat (9) to the Seat Carriage (3) with four M6 x 38mm Patch Screws (81) and four 9 9 M6 Washers (44) (only two of each are shown). Note: The Patch Screws and Washers may be preattached to the underside of the Seat. 3 44 44 81 10
10
8.
Tip: Avoid pinching the Pulse Wire (58).
Attach the Backrest (8) to the Seat Carriage (3)
with two M6 x 18mm Patch Screws (77) and
two M6 x 42mm Patch Screws (51).
Tip: First tighten the M6 x 18mm Patch
Screws (77), and then tighten the M6 x
42mm Patch Screws (51).
See step 7.
Tighten the M10 Locknuts (64).
8
8
77
51
3
58
9
9.
Attach the Seat (9) to the Seat Carriage (3) with
four M6 x 38mm Patch Screws (81) and four
M6 Washers (44) (only two of each are shown).
Note: The Patch Screws and Washers may
be preattached to the underside of the Seat.
9
44
81
44
3