ProForm 300 Cr Bike English Manual - Page 9
Tip: Avoid pinching the Pulse Wire 58.
View all ProForm 300 Cr Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
6. Untie and discard the wire ties on the Main Wire Harness (43) and the Pulse Extension 6 Wire (79). 4 While another person holds the Console (4) near the Upright (2), connect the wires on the Console to the Main Wire Harness (43) and to the Pulse Extension Wire (79). Insert the excess wire into the Upright (2) or into the Console (4). Tip: Avoid pinching the wires. Attach the Console (4) to the Upright (2) with four M4 x 16mm Flange Screws (80). 79 2 80 80 43 Avoid pinching the wires 7. Identify and orient the Seat Handlebar (11) so that the contacts on the Pulse Grips (10) face upward. Make sure that the hexagonal holes are in the indicated locations. Tip: Avoid pinching the Pulse Wire (58). Attach the Seat Handlebar (11) to the Seat Carriage (3) with two M10 x 32mm Button Bolts (78) and two M10 Locknuts (64). Do not fully tighten the Locknuts yet. 7 10 Avoid pinching the Pulse Wire (58) 11 Hexagonal Holes 10 58 64 3 78 9