ProForm 300 Spx Bike English Manual - Page 5

ASSEMBLY •• To hire an authorized service technician to assemble this product, call 1-800-445-2480. •• Assembly requires two persons. •• Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you nish all assembly steps. •• Left parts are marked “"L”" or “"Left,”" and right parts are marked “"R”" or “"Right.”" •• Some parts may be preassembled. Extra parts may be included. •• In addition to the included tool(s), assembly requires the following tool(s): one adjustable wrench Assembly may be easier if you have a set of wrenches. To avoid damaging parts, do not use power tools. 1. If there is a shipping bracket (not shown) on the rear of the Frame (1), remove the two screws, 1 the two washers, and the shipping bracket. Discard the screws, washers, and shipping bracket. Identify the Rear Stabilizer (7), which does not have wheels. Attach the Rear Stabilizer (7) to the Frame (1) with two M8 x 90mm Carriage Bolts (34), two M8 Washers (33), and two M8 Acorn Nuts (53). 33 53 7 34 1 53 33 5