ProForm 300 Spx Bike English Manual - Page 6
Attach the Front Stabilizer 8 to the Frame 1
 |
View all ProForm 300 Spx Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
2. If there is a shipping bracket (not shown) on the front of the Frame (1), remove the two screws, 2 the two washers, and the shipping bracket. Discard the screws, washers, and shipping bracket. Orient the Front Stabilizer (8) so that the Wheels (21) are in the position shown. Attach the Front Stabilizer (8) to the Frame (1) with two M8 x 90mm Carriage Bolts (34), two M8 Washers (33), and two M8 Acorn Nuts (53). 3. Identify the Right Pedal (35). 3 Using an adjustable wrench, firmly tighten the Right Pedal (35) clockwise into the Right Crank Arm (31). Then, tighten the Left Pedal (45) counterclockwise into the Left Crank Arm (12). 21 34 1 8 33 53 53 33 31 45 12 35 6
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13
-
14
-
15
-
16
 |
 |
6
3
3.
Identify the Right Pedal (35).
Using an adjustable wrench,
firmly tighten
the
Right Pedal (35)
clockwise
into the Right Crank
Arm (31).
Then, tighten the Left Pedal (45)
counterclock-
wise
into the Left Crank Arm (12).
45
35
2.
If there is a shipping bracket (not shown) on the
front of the Frame (1), remove the two screws,
the two washers, and the shipping bracket.
Discard the screws, washers, and shipping
bracket.
Orient the Front Stabilizer (8) so that the Wheels
(21) are in the position shown.
Attach the Front Stabilizer (8) to the Frame (1)
with two M8 x 90mm Carriage Bolts (34), two M8
Washers (33), and two M8 Acorn Nuts (53).
1
8
34
21
33
53
2
33
53
12
31