ProForm 380 Razor Elliptical Uk Manual - Page 7

3. Have another person hold the Upright (2) near the Frame (1). Locate the wire tie in the Upright (2). Tie the lower end of the wire tie to the Wire Harness (86). Next, pull the upper end of the wire tie upward out of the top of the Upright. Then, untie and discard the wire tie. Tip: To prevent the Wire Harness (86) from falling inside the Upright (2), secure the Wire Harness with a rubber band. Tip: Avoid pinching the Wire Harness (86). Attach the Upright (2) to the Frame (1) with four M10 x 20mm Patch Screws (79) and four M10 Split Washers (78). Do not tighten the Patch Screws yet. 3 Avoid pinching the Wire Harness (86) Wire Tie 2 79 78 86 1 78 79 78 79 4. Slide the Console Cover (96) onto the Upright (2) and move it downward. 4 Orient the Console Bracket (3) so that the sticker faces upward. Then, hold the Console Bracket near the Upright (2) and insert the Wire Harness (86) upward through the Console Bracket. Tip: Avoid pinching the Wire Harness (86). Attach the Console Bracket (3) to the Upright (2) with four M4 x 16mm Flat Head Screws (73). 73 73 86 3 2 96 Avoid pinching the Wire Harness (86) 7