ProForm 380 Razor Elliptical Uk Manual - Page 8
mm Round Head Screws 84.
View all ProForm 380 Razor Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
5. The Console (4) can use four D batteries (not included); alkaline batteries are recommended. IMPORTANT: If the Console has been exposed to cold temperatures, allow it to warm to room temperature before inserting batteries. Otherwise, you may damage the console displays or other electronic components. Remove the battery cover, insert the batteries into the battery compartment, and then reattach the battery cover. Make sure to orient the batteries as shown by the diagram inside the battery compartment. To purchase an optional AC adapter, contact the store where you purchased this product or call the telephone number on the cover of this manual. To avoid damaging the console, use only a manufacturer-supplied AC adapter. Plug one end of the AC adapter into the jack on the console; plug the other end into an outlet installed in accordance with all local codes and ordinances. 5 Batteries Cover 4 Batteries 6. While another person holds the Console (4) near the Console Bracket (3), connect the console wire to the Wire Harness (86). Then, insert the console pulse wires downward through the Upright (2). Pull a console pulse wire outward from each side of the Upright. Tip: Avoid pinching the wires. Attach the Console (4) to the Upright (2) with four M4 x 16mm Round Head Screws (84). 6 4 Pulse Wires Avoid pinching 2 the wires Console Wire 86 3 84 84 8