ProForm 390 E Elliptical Canadian English Manual - Page 11

10. Apply a generous amount of the included grease to the axles on the Upright (2). Orient the Left and Right Upper Body Arms (8, 9) as shown, and slide them onto the left and right sides of the Upright (2). Attach each Upper Body Arm (8, 9) with an M8 x 20mm Patch Screw (80) and an M8 Washer (33). 10 8 80 33 2 Grease 9 33 80 11. Apply a small amount of grease to a Shoulder Patch Bolt (31). 11 While a second person holds the front end of 76 the Right Pedal Arm (49) inside the bracket on the right Upper Body Leg (6), insert the Shoulder Patch Bolt (31) through the right Upper Body Leg and the Right Pedal Arm. Tighten the Shoulder Patch Bolt (31) into the welded nut on the right Upper Body Leg (6). 6 Repeat this step to attach the Left Pedal Arm (not shown) to the left Upper Body Leg (6). Tighten the M8 x 45mm Button Bolts (76). 76 6 Grease 31 49 11