ProForm 390 E Elliptical Canadian English Manual - Page 21

HOW TO ADJUST THE REED SWITCH If the console does not display correct feedback, the reed switch should be adjusted. To adjust the reed switch, you must remove the right disc cover and the right pedal disc. Using a flat screwdriver, remove the right Disc Cover (18). Locate the Reed Switch (58). Loosen, but do not remove, the M4 x 16mm Screw (92). 27 81 18 92 24 58 41 Then, remove the M8 x 12mm Screws (81) from the Right Pedal Disc (27), and gently rotate the Right Pedal Disc out of the way. Next, rotate the Crank Assembly (24) until a Magnet (41) is aligned with the Reed Switch (58). Slide the Reed Switch slightly toward or away from the Magnet. Then, retighten the M4 x 16mm Screw (92). Rotate the Crank Assembly (24) for a moment. Repeat these actions until the console displays correct feedback. When the reed switch is correctly adjusted, reattach the right pedal disc and the right disc cover. 21