ProForm 390 E Elliptical Canadian English Manual - Page 9

Pulse Wires 28.

Get ProForm 390 E Elliptical PDF manuals and user guides View all ProForm 390 E Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

7. Untie and discard the wire tie attached to the Wire Harness (42). Locate the Pulse Wires (28) inside the left and right sides of the Handlebar (39) and pull them upward out of the Upright (2). While a second person holds the Console (4) near the Upright (2), connect wires on the Console to the Wire Harness (42) and to the Pulse Wires (28). Insert the excess wires into the Upright (2). Tip: Avoid pinching the wires. Attach the Console (4) to the Upright (2) with four M4 x 16mm Screws (92). 7 4 42 28 2 92 92 39 Avoid pinching the wires 8. Attach the Console Cover (32) to the back of the Console (4) with two M4 x 48mm Screws 8 (89). 4 32 89 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
9
7
4
2
7.
Untie and discard the wire tie attached to the
Wire Harness (42).
Locate the Pulse Wires (28) inside the left and
right sides of the Handlebar (39) and pull them
upward out of the Upright (2).
While a second person holds the Console (4)
near the Upright (2), connect wires on the
Console to the Wire Harness (42) and to the
Pulse Wires (28).
Insert the excess wires into the Upright (2).
Tip: Avoid pinching the wires.
Attach the
Console (4) to the Upright (2) with four M4 x
16mm Screws (92).
28
42
39
92
92
Avoid
pinching
the wires
8.
Attach the Console Cover (32) to the back of
the Console (4) with two M4 x 48mm Screws
(89).
8
4
32
89