ProForm 400 X Treadmill English Manual - Page 9
with four Weight Rack Screws 56.
 |
View all ProForm 400 X Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
7. Attach the Weight Rack (59) to the Uprights (38) as shown 7 with four Weight Rack Screws (56). See assembly stp 6. Tighten the two Crossbar Screws (98) (only one is shown). 8. Attach the Storage Latch (66) to the left Upright (38) with 8 two 3/4" Screws (5) as shown. Do not overtighten the Screws. 56 59 38 56 38 66 5 9. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep the included allen wrenches in a secure place; the large allen wrench is used to adjust the walking belt (see page 17). To protect the floor or carpet, place a mat under the treadmill. 9
-
1 -
2
-
3
-
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
 |
 |
9
9.
Make sure that all parts are properly tightened before you use the treadmill.
Note: Extra hardware may
be included. Keep the included allen wrenches in a secure place; the large allen wrench is used to adjust the
walking belt (see page 17). To protect the floor or carpet, place a mat under the treadmill.
8.
Attach the Storage Latch (66) to the left Upright (38) with
two 3/4” Screws (5) as shown.
Do not overtighten the
Screws.
5
66
38
8
7.
Attach the Weight Rack (59) to the Uprights (38) as shown
with four Weight Rack Screws (56).
See assembly stp 6. Tighten the two Crossbar Screws
(98) (only one is shown).
59
38
56
56
7