ProForm 490 Spx Bike English Manual - Page 6
Assembly
View all ProForm 490 Spx Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
ASSEMBLY • To hire an authorized service technician to assemble this product, call 1-800-445-2480. • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you nish all assembly steps. • Left parts are marked "L" or "Left" and right parts are marked "R" or "Right." • In addition to the included tool(s), assembly requires the following tools: one Phillips screwdriver one adjustable wrench one tape measure Assembly may be easier if you have a set of wrenches. To avoid damaging parts, do not use power tools. 1. Go to www.proformservice.com/registration on your computer and register your product. 1 Registration provides the following benefits: • activates your product manufacturer's warranty • saves you time if you ever need to contact Customer Care • allows us to notify you of upgrades and offers Note: If you do not have Internet access, call CUSTOMER CARE (see the front cover of this manual) to register your product. 2. Remove the two screws, the two washers, and the shipping bracket (not shown) from the rear of 2 the Frame (1). Discard the screws, washers, and shipping bracket. Identify the Rear Stabilizer (7), which does not have wheels. Attach the Rear Stabilizer (7) to the Frame (1) with two M10 x 25mm Screws (34) and two Stabilizer Washers (33). 34 33 1 7 6