ProForm 510 Ex Elliptical English Manual - Page 14

20. While a second person holds the Console (33) near the Handlebar (10), connect the console wires to the Upright Wire (60) and to the Pulse Wire (135). Insert the excess wire into the Console (33) or into the Handlebar (10). Tip: Avoid pinching the wires. Attach the Console (33) to the Handlebar (10) with four M4 x 16mm Screws (93). 20 33 Avoid pinching the wires 135 10 60 93 21. Attach the Console Cover (11) to the Console (33) with two M4 x 16mm Screws (93). 21 33 93 11 22. Plug the Power Adapter (59) into the receptacle on the frame of the elliptical. 22 59 To plug the Power Adapter (59) into an outlet, see HOW TO PLUG IN THE POWER ADAPTER on page 15. 23. Make sure that all parts of the elliptical are properly tightened. Note: Some hardware may be left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the elliptical. 14