ProForm 510 Ex Elliptical English Manual - Page 7
Connect the Upright Wire 60 to the Frame Wire
View all ProForm 510 Ex Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
3. Orient the Small Bumper (13) so that the recessed holes are in the indicated location. 3 While a second person lifts the Frame (1), attach the Small Bumper (13) to the underside of the Frame with two M4 x 25mm Screws (132). 4. Orient the Upright (5) and the Top Cover (23) as shown. Slide the Top Cover upward onto the 4 Upright. Have a second person hold the Upright (5) and the Top Cover (23) near the Frame (1). Connect the Upright Wire (60) to the Frame Wire (109). Tip: To prevent the Upright Wire (60) from falling into the Upright (5), secure the top of the Upright Wire with a rubber band or tape. 1 13 Recessed 132 Holes 5 60 23 109 1 7
7
3.
Orient the Small Bumper (13) so that the
recessed holes are in the indicated location.
While a second person lifts the Frame (1), attach
the Small Bumper (13) to the underside of the
Frame with two M4 x 25mm Screws (132).
4.
Orient the Upright (5) and the Top Cover (23)
as shown. Slide the Top Cover upward onto the
Upright.
Have a second person hold the Upright (5) and
the Top Cover (23) near the Frame (1).
Connect the Upright Wire (60) to the Frame Wire
(109).
Tip: To prevent the Upright Wire (60) from
falling into the Upright (5), secure the top of
the Upright Wire with a rubber band or tape.
3
4
13
1
5
1
109
60
23
132
Recessed
Holes