ProForm 600 Treadmill Uk Manual - Page 17

The Information Mode/demo Mode

Page 17 highlights

8 Follow your progress with the LED track and the four displays. See step 5 on page 10. 9 Measure your pulse, if desired. See step 6 on page 11. 10 When the program is finished, remove the key. Step onto the foot rails and remove the key from the console. Keep the key in a secure place. Note: If the displays and various indicators on the console remain lit after the key is removed, the console is in the "demo" mode. Refer to the instructions below and turn off the demo mode. When you are finished using the treadmill, move the on/off switch near the power cord to the off position. THE INFORMATION MODE/DEMO MODE The console features an information mode that keeps track of the total number of hours that the treadmill has been operated and the total number of miles that the walking belt has moved. The information mode also allows you to switch the console from miles per hour to kilometres per hour. In addition, the information mode allows you to turn on and turn off the demo mode. To select the information mode, hold down the stop button while inserting the key into the console. When the information mode is selected, the following information will be shown: The distance/laps display will show the total number of miles that the walking belt has moved. The time/incline display will show the total number of hours the treadmill has been used. IMPORTANT: The calories/fat calories/pulse display should be blank. If a "d" appears in the display, the console is in the "demo" mode. This mode is intended to be used only when a treadmill is displayed in a store. When the console is in the demo mode, the power cord can be plugged in, the key can be removed from the console, and the displays and indicators on the console will automatically light in a preset sequence, although the buttons on the console will not operate. If a "d" appears in the calories/fat calories/pulse display when the information mode is selected, press the speed t button so the calories/fat calories/pulse display is blank. To exit the information mode, remove the key from the console. OPTIONAL HAND WEIGHTS Optional hand weights let you include upperbody exercise in your workouts. The hand weights fit into convenience holders in the console. To purchase the hand weights, contact our Customer Service Department. at 0345-089009. OPTIONAL CHEST PULSE SENSOR An optional chest pulse sensor adds even more features to the console. The chest pulse sensor offers hands-free operation and continuously monitors your heart rate during your workouts. To purchase the optional chest pulse sensor contact our Customer Service Department at 0345-089009. An "E," for english miles, or an "M," for metric kilometres, will appear in the speed/min-mile display. Press the speed s button to change the unit of measurement. 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26

17
Follow your progress with the LED track and
the four displays.
See step 5 on page 10.
Measure your pulse, if desired.
See step 6 on page 11.
When the program is finished, remove the
key.
Step onto the foot rails and remove the key from
the console. Keep the key in a secure place.
Note:
If the displays and various indicators on the
console remain lit after the key is removed, the
console is in the “demo” mode. Refer to the in-
structions below and turn off the demo mode.
When you are finished using the treadmill, move
the on/off switch near the power cord to the off
position.
THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps
track of the total number of hours that the treadmill has
been operated and the total number of miles that the
walking belt has moved. The information mode also
allows you to switch the console from miles per hour to
kilometres per hour. In addition, the information mode
allows you to turn on and turn off the demo mode.
To select the information mode, hold down the stop
button while inserting the key into the console. When
the information mode is selected, the following informa-
tion will be shown:
The distance/laps display will
show the total number of miles
that the walking belt has moved.
The time/incline display will
show the total number of hours
the treadmill has been used.
An “E,” for english miles, or an
“M,” for metric kilometres, will
appear in the speed/min-mile
display. Press the speed
s
but-
ton to change the unit of mea-
surement.
IMPORTANT: The
calories/fat calories/pulse
display should be blank.
If
a “d” appears in the display,
the console is in the “demo”
mode. This mode is intended
to be used only when a tread-
mill is displayed in a store.
When the console is in the
demo mode, the power cord
can be plugged in, the key
can be removed from the
console, and the displays and
indicators on the console will
automatically light in a preset sequence, although the
buttons on the console will not operate.
If a “d” ap-
pears in the calories/fat calories/pulse display
when the information mode is selected, press the
speed
t
button so the calories/fat calories/pulse
display is blank.
To exit the information mode, remove the key from the
console.
OPTIONAL HAND WEIGHTS
Optional hand weights
let you include upper-
body exercise in your
workouts. The hand
weights fit into conve-
nience holders in the
console.
To purchase
the hand weights,
contact our Customer
Service Department.
at 0345-089009.
OPTIONAL CHEST PULSE SENSOR
An optional chest pulse sensor adds even more
features to the console. The chest pulse sensor offers
hands-free operation and continuously monitors your
heart rate during your workouts.
To purchase the
optional chest pulse sensor contact our Customer
Service Department at 0345-089009.
10
9
8