ProForm 600 Treadmill Uk Manual - Page 7

3. Locate the plastic tie in the post on the left Upright (82). Hold a Handrail Extension (85) in the position shown. Insert the plastic tie into the Handrail Extension as you insert the Handrail Extension into the post. Attach the Handrail Extension with three Small Screws (76). Note: The plastic tie is tied to the 50" Wire Harness (125). Be careful to avoid damaging the Hand Pulse Wire. The 50" Wire Harness is used with the optional chest pulse sensor (see page 17). Slide a Handrail Foam Grip (110) onto the Handrail Extension (85). Press one Fastener (47) into the Handrail Foam Grip. Attach the other Handrail Extension and Handrail Foam Grip to the right Upright (not shown). Note: There is not a pulse wire in the right Upright. 4. Make sure that the Lock Knob Sleeve (111) is fully inserted into the left Upright (82). Remove the Lock Knob (102) from the Lock Pin (115). Make sure that the Lock Pin Collar (113) and the Spring (112) are on the Lock Pin. Insert the Lock Pin into the left Upright (82) and tighten the Lock Knob onto it. 3 76 Plastic Tie 125 110 Post 85 76 82 47 4 82 112 102 113 115 111 5. Make sure that all parts are tightened before you use the treadmill. Keep the included allen wrench in a secure place. The allen wrench is used to adjust the walking belt (see page 20). To protect the floor or carpet from damage, place a mat under the treadmill. 7