ProForm 600 Zlt Treadmill Uk Manual - Page 12
If You Do Not Connect The Con
View all ProForm 600 Zlt Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
11. Have a second person hold the console assembly near the Right Upright (89). Connect the Upright Wire (88) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Remove the long tie from the Upright Wire. Then, insert the connectors into the Right Upright (89). Set the console assembly on the Right Upright (89) and the Left Upright (not shown). Make sure that no wires are pinched. 11 Console Assembly Console 88 Console Wire Wire Long Tie 89 88 12. Start an M8 x 25mm Patch Bolt (5) and two 5/16" x 5/8" Patch Bolts (113) with two M8 Star Washers (10) into the Right Upright (89) and Right Handrail (101) as shown. Do not tighten the Patch Bolts yet. Attach the Left Handrail (not shown) as described above. Then, firmly tighten all six Patch Bolts. 12 101 5 113 10 89 12